In the process of using the packer, it is inevitable to have faults. However, you can see the causes from the packing effect. That is to say, different packing effects are reflected in different faults. If the user in the use process, can find these abnormal phenomena as soon as possible, can also find the problems faster, so as to eliminate them in time. The corresponding causes of the abnormal performance of McGonagall are introduced.
McGrady table automatic baler
1. There is abnormal sound in work. There are many reasons for this phenomenon. Generally, the common parts are loose. You can simply check the connection parts, frequently use components, internal components, etc., and tighten them. Most of the cases can be lifted.
2. The belt is always broken during packing. There are two main reasons for belt collapse: one is that the bonding time is relatively short, and the packing belt is not fully fused; the other is that the bonding time is relatively long, and the packing belt will collapse if the bonding time is too long. These two cases are relatively easy to distinguish, so you can adjust the heating time of the iron head according to different situations.
3. There is burr in the cutting. After using the packer for a period of time, there will be burr in the cutting. At this time, the user should pay attention to it. This may be the performance of serious wear of the packer cutter. The cutter should be purchased in time. When the machine can no longer cut the belt, it should be replaced in time.
The above is what McGonagall introduced to you more common, if you have other Automatic baler Abnormal phenomenon, can contact McGonagall after sales department, experienced professionals for your guidance!
