With more and more balers on the market, we must pay attention to when buying. Otherwise, the effect will be greatly reduced when using, such as frequent tape sticking, adhesion problems and so on. Let's talk about the main reasons for the small problems! The main points are as follows:
1. The temperature is too high or not enough. Sometimes the special tape has poor viscosity, so the temperature must be very accurate;
2. The voltage used is not enough. The voltage of many factories is often insufficient. If the extension line or cable line is used again, the voltage drop will be caused, and the original adjusted temperature will be lowered, or even burned when the motor is bound tightly. Therefore, it is necessary to avoid using the cable as much as possible. If the extension line must be used, it must be connected with a thicker rather than too long wire;
3. The electric heating steel sheet is too high or too low, or left to right, so it meets the PP belt at the top and bottom, or the left and right cutting tools, and cannot enter the heating, so it must be adjusted according to the situation;
4. The temperature is too high due to the fault of the breeze fan for smoke exhaust.
That's the main problem. Do you understand?
Time is money, which is a golden rule. In order to pursue high quality and high standard development, enterprises surpass their competitors and constantly innovate in all aspects. From the PP belt packer in the packaging industry, it can reflect this point from the point of view. Now please take a look at the editor to explain it to you.
From the initial shortage of supply to the current oversupply, from the seller's market of packaging industry to the buyer's market of packaging industry, consumers' requirements for consumer goods are higher and higher, and enterprises are also constantly innovating. The packaging machinery industry is also constantly innovating, following the market development direction to meet the needs of consumers, the market demand of packaging machine is still very broad, as long as the We believe that the future of baler is bright. PP belt packer adopts excellent PLC control, so that the operation time is accurate to 1 millisecond, and can be adjusted on site to ensure the packing speed of special flow operation. The speed of packing machine is 2.2 per second, which can adapt to different parts. No oil, durable and easy to operate. It can adjust the tightness at will to meet the requirements of various kinds of tightness, without falling off. The strapping is placed on the outside, which is easy to change.
The above information explains the knowledge of PP belt packer in detail. If you have any need for our products, you can consult our company directly. Brief introduction of compression packer
The compression packer can be used for packing various metal and nonmetal articles. Such as: straw, cardboard, cartons, shredded paper, cotton yarn, wool ball, plastic, vegetation, sponge, wool, loose fiber, clothing, cloth, tobacco, plastic and other light foam loose materials.
The user can set the packing specification and size according to the needs, so as to cooperate with the transportation or storage to the maximum extent. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation costs, and increase the furnace charging speed
